Respekta CH 44099 GIS A Bedienungsanleitung Seite 32

Do not touch the illuminant with your hands. The sweat on your fingers will
reduce the operating time of your new illuminant.
1. Disconnect the appliance from the mains.
2. The illuminate should cool down before replacing.
3. Remove the bracket, the glass cover and the illuminate.
4. Replace the illuminate by a new one of the same kind and power. Reinstall the
glass cover and the bracket.
The power cord must be replaced by a qualified
POSSIBLE CAUSE
 The plug of the appliance is not
connected to the socket.
 The plug has become loose.
Replacing of the illuminate
Use a thin cloth or a thin glove.
The illuminants as well as all kinds of filters
do not carry a guarantee!
Replacing of the power cord
and authorized professional only.
7. TROUBLE SHOOTING
MALFUNCTION
The appliance does not work at all.
Attention!
WARNING!
 Check the corresponding socket by
connecting it with another appliance.
 Check the fuse.
32
MEASURE