Albrecht AE 69-2H Bedienungsanleitung Seite 51

• To select another search bank, press Func + PSrc or
Func +
+ to decrease it.
• Hold down Func +
to quickly move through the search bank numbers.
After choosing the search bank, follow these steps to set the
lower limit and upper limit frequency.
Enter the lower limit frequency by using the 0-9 and
●/Clr keys.
Press E to select the lower limit frequency.
Enter the upper limit frequency by using the 0-9 and
●/Clr keys.
Press E to select the upper limit frequency.
Search Skip Memory
You can skip up to 50 specified frequencies during a search.
This lets you avoid unwanted frequencies or those already
stored in a channel.
• To skip a frequency, press Func and L/O when the
scanner stops on the frequency during a search or a
search hold.
• The scanner stores the frequency in memory and
automatically resumes the search if it is not in hold.
Follow these steps to clear a single frequency from skip
memory so the scanner stops on it during a search.
• Press Hold to stop the search.
• Press Func +
L/O appears.
• Press Func + L/O. The L/O icon disappears.
To clear all the skip frequencies at once while searching or
search hold, press Func then press and hold L/O until the
scanner beeps.
Notes:
• If you selected all frequencies to be skipped within the
search range, the scanner beeps 3 times and does not
search.
• If you select more than 50 frequencies to skip, each new
frequency replaces a frequency previously stored,
beginning with the first stored frequency.
to increase the search bank number or Func
or Func +
or Func +
English
for about 1 second
to select the frequency.
51