Albrecht AE 69-2H Bedienungsanleitung Seite 49

The preset frequency ranges are:
Frequency Range MHz
1 30.0000 -
2 83.0000 -
3 160.6000 - 162.5875
4 440.0000 - 465.9950
5 466.0000 - 469.9900
Frequency Range MHz
1 84.0150 -
2 144.0000 - 145.9875
3 156.0000 - 162.0250
4 162.0300 - 173.9900
5 406.0000 - 439.99375
Frequency Range MHz
1 25.0000 -
2 160.6000 - 162.59375
3 162.6000 - 173.99375
4 440.0000 - 465.99375
5 466.0000 - 469.99375
To switch the band plan between 1, 2 and 3:
• Make sure the power is turned off.
• While holding down 1, 2, or 3, turn on the scanner.
Note: Please carry out a memory initialization (Reset) after
band plan was changed. We recommend to change the band
plan setting immediately for the correct country setting before
first use of the scanner, later, in most cases, changing will be
no more necessary.
Chain Search Mode
Press Func + Src to start chain search mode. SRCH, the
enabled search bank number, and or (indicating the search
direction) appear. The search bank number being searched
flashes.
Press 1- 5 to enable or disable the search bank number being
searched in this mode. Enabled bank numbers appear, while
disabled bank numbers disappear.
5 Search Bands Band Plan 1
79.9875
87.2625
5 Search Bands Band Plan 2
87.2550
5 Search Bands Band Plan 3
29.9950
English
Steps
12.5 kHz
12.5 kHz
12.5 kHz
5 kHz
10 kHz
Steps
20 kHz
12.5 kHz
12.5 kHz
10 kHz
6.25 kHz
Steps
5 kHz
6.25 kHz
6.25 kHz
6.25 kHz
6.25 kHz
49