Using AC Power
You can power the scanner using an optional 6 V DC, 500
mA wall adapter AD-671 or equivalent (center pin positive).
Adapters, which do not meet these specifications can damage
your scanner, the adapter or even the batteries.
Plug the AC adapter into the DC 6 V socket and the AC side
into a 230 V wall outlet. If rechargeable batteries are
inserted and the battery switch is in NI-MH BATT. Position,
the adapter powers the scanner and can recharge the
batteries at the same time.
Attaching the Belt Clip
To make your scanner easier to carry when you are on the go,
use the supplied belt clip. Use a Phillips screwdriver and the
supplied screws to attach the clip to the scanner.
42
English