Cleaning The Automatic Document Feeder - Xerox DocuMate 152 Benutzerhandbuch

Maintenance

Cleaning the Automatic Document Feeder

102
You may need to clean the ADF feed mechanism if your
documents do not feed easily into the ADF, or several feed in at the
same time.
To clean the ADF:
1. Wet a soft cloth with some Isopropyl rubbing alcohol (95%).
2. Press the ADF cover release on the top right of the scanner
body to open the Automatic Document Feeder cover.
3. Wipe the feed roller from side to side. Rotate the roller to clean
its entire surface.
NOTE: Please be careful when cleaning the roller. The roller is
designed to rotate in one direction only. As you're cleaning the
roller, make sure it rotates easily, and continue rotating it in that
direction while wiping it clean. Do NOT force the roller to rotate
in the opposite direction. Forcing the roller to rotate will damage
it, and may cause the scanner to feed pages incorrectly.
4. Wipe the ADF pad from top to bottom. Be careful not to snag
the cloth on the springs on either side of the pad.
5. Close the cover when you're finished.
DocuMate 152 Scanner User's Guide