Ikra GM AAS 4025 Gebrauchsanweisung Seite 31

range of performance makes working
more effective and safer.
b) Do not use a power tool with a dam-
aged switch. A power tool that cannot
be switched on or off any more is dan-
gerous and must be repaired.
c) Pull the mains plug and/or remove
the battery before adjusting a tool,
changing accessories or putting the
tool aside. This precaution avoids the
unintentional start of the tool.
d) Store power tools that are currently
not used out of the reach of children.
Do not allow persons to use the tool
if they are not familiar with the tool or
these instructions. Power tools are dan-
gerous if used by inexperienced persons.
e) Thoroughly maintain your power
tool. Check whether moving parts
are working properly and are not jam-
ming/sticking, and whether parts are
broken or otherwise damaged in a
way that may affect the function of
the power tool. Have damaged parts
repaired before using the tool. Many
accidents are the result of poorly main-
tained power tools.
f) Keep cutting tools sharp and clean.
Thoroughly maintained cutting tools with
sharp cutting edges are jamming less
often and are easier to guide.
g) Use power tools, accessories, add-
on tools, etc. in accordance with
these instructions and in the way
prescribed for the respective type of
tool. You should also consider the
working conditions and the work to
be carried out. The use of power tools
for purposes other than those intended
for the respective tool may result in dan-
gerous situations.
5) Battery tool use and care
a) Recharge only with the charger spec-
ified by the manufacturer. A charger
GB | Operating Instructions
b) Use power tools only with specifically
c) When battery pack is not in use, keep
d) Under abusive conditions, liquid may
6) Service
a) Have the power tool serviced by qual-
7) Safety instructions for chain saws
• Keep all parts of your body clear of
• Always hold the chain saw with your
6
that is suitable for one type of battery
pack may create a risk of fire when used
with another battery pack.
designated battery packs. Use of any
other battery packs may create a risk of
injury and fire.
it away from other metal objects, like
paper clips, coins, keys, nails, screws
or other small metal objects, that can
make a connection from one terminal
to another. Shorting the battery termi-
nals together may cause burns or a fire.
be ejected from the battery; avoid
contact. If contact accidentally oc-
curs, flush with water. If liquid con-
tacts eyes, additionally seek medical
help. Liquid ejected from the battery
may cause irritation or burns.
ified technical personnel only; repairs
should be carried out using exclu-
sively original spare parts. This will
ensure the continued safe operation of
the power tool.
the chain while the saw is running.
Before starting the saw, make sure
that the chain does not touch any ob-
jects. When working with a chain saw,
even a short moment of inattentiveness
may result in clothes or parts of the body
being caught by the chain.
right hand at the rear handle and your
left hand at the front handle. Holding
the chain saw differently (left hand – rear
handle / right hand – front handle) during
operation will increase the risk of injury
and is not permitted.