Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.
While charging, the pilot light will be blinking to indicate the charger is under working. When the charging
operation is finished, the charger will switch off automatically and 3 pilot lights will be on instead of blinking.
4.
After charging, unplug the charger first, and then remove the connector pin.
Note:
(1) Do not let the appliance uncharged for a long time, because the inner accumulators may be damaged.
(2) The appliance cannot work during charging.
CLEANING AND MAINTENANCE
1.
Except for the main unit and battery, other parts can be cleaned in warm soapy water (<40℃). Rinse and dry
them completely before reassembly. Do not immerse the main unit in water or any other liquids.
2.
Use only a soft moist cloth to clean the outside of the main unit. Do not allow any kind of liquid to enter the
main unit.
3.
Do not use aggressive chemicals or abrasives.
4.
Do not use the device if the filter is broken or worn out.
5.
The unit does not contain parts serviceable by you, do not disassemble it and do not try to repair it yourself.
6.
Mount the bracket into the wall, the appliance can be rested on the bracket after use.
1. How to empty the dust cup:
1)
Turn off the appliance. Press the dust cup release button to take out the dust cup.
2)
Take out the cyclone.
3)
Empty the dust cup.
2. How to clean the dust cup filter:
1) Take out cyclone and HEPA filter from the dust cup.
2) There is a sponge in cyclone, please take it out too.
3) Rinse them in water, and then air dry completely before placing them back in the dust cup.
- 13 -
Werbung
