Private Branch Exchanges / Clip; Dialling Pause - AUDIOLINE Oyster200 Bedienungsanleitung

6 Private Branch Exchanges / CLIP

R button on private branch exchanges
If the telephone is connected to a private branch exchange, functions such as transferring
calls and automatic call back can be used via the R button. The dealer where you pur-
chased the exchange can provide information as to whether the telephone will work pro-
perly with the exchange.
Number for an outside line
In the case of private branch exchanges, it is necessary to dial a number to get an outside
line with its corresponding dialling tone. Save the number for an outside line in your hand-
set, . Page 37. It is automatically prefixed to a phone number dialled from the call log.

Dialling pause

When using some older private branch exchanges, it takes a little time before the dialling
tone becomes audible. Particularly in the case of such private branch exchanges, it is
possible to insert a dialling pause after the number for the outside line so that the number
can be dialled in a continuous process without having to wait for the dialling tone.
2 sec £
After dialling the number for the outside line, the telephone then waits 3 seconds before
dialling the actual phone number.
The dialling pause can also be entered with the phone numbers in the phone
number memory.
Caller number display (CLIP
If this function is available with your telephone line, the number of the caller appears in the
display when the phone rings. If the caller has suppressed transmission of his phone
number, a corresponding message appears in the display. The phone number is not dis-
played and, as a result, is not stored in the calls list.
The CLIP (caller number display) function is an optional service offered by tele-
phone network providers. Contact your network provider for further information.
1
CLIP: Calling Line Identification Presentation
Private Branch Exchanges / CLIP
Insert dialling pause
1
)
35