10. Private Branch Exchanges
R button on private branch exchanges
If the telephone is connected to a private branch exchange, functions such
as transferring calls and automatic call back can be used via the R button��
Please refer to the operating manual supplied with your private branch
exchange to determine which recall (Flash) time must be set in order to
use these functions�� The dealer where you purchased the exchange can
provide information as to whether the telephone will work properly with the
exchange��
Setting the Recall time
Two recall timings are available�� Short 100ms and Long 300ms��
,
or
,
SHORT
or
,
Dialling pause
In the case of private branch exchanges, it is necessary to enter an access
code to get an outside line with its corresponding dialling tone�� When
using some older private branch exchanges, it takes a little time before the
dialling tone becomes available�� Particularly in the case of such private
branch exchanges, it is possible to insert a dialling pause after the number
for the outside line so that the number can be dialled in a continuous
process without having to wait for the dialling tone��
2 sec
Service−Hotline Germany: Tel. 0180 5 001388, cost via German landline at time of going to print: 14 ct/min., different costs possible via mobile telephone systems
Service−Hotline Germany: Tel. 0180 5 001388, cost via German landline at time of going to print: 14 ct/min., different costs possible via mobile telephone systems
Open the Menu, select 'RECALL'
The current setting is shown
Select and confirm 'SHORT' or 'LONG'
Insert a dialling pause�� 'P' is shown
in the display��
Private Branch Exchanges
The pause can also be entered with the phone number in the
phone book��
R button and Supplementary services
Your telephone supports the supplementary services offered by your
telephone network provider, such as call brokering, call waiting and
conference calls�� The supplementary services can be used in conjunction
with the R button�� Please contact your telephone network provider with
regard to enabling the supplementary services and which recall time must
be used��
Dial mode
Two dialling modes are available, Tone and Pulse�� Only change this setting
if you are advised to do so by your private branch exchange dealer��
,
or
,
TONE
or
,
Reset to default settings
You can reset your handset to its original default settings�� The phone book,
calls and redial lists are not deleted when you reset the handset��
,
or
,
,
,
Open the Menu, select 'DIAL MODE'
The current setting is shown
Select and confirm 'TONE' or 'PULSE'
Open the Menu, select 'RESET'
Enter the PIN code and confirm
GB
35