AUDIOLINE Oyster200 Bedienungsanleitung Seite 28

Putting the Telephone into Operation
Inserting the batteries
Insert the battery pack in the open battery
compartment and plug the connector in the
connection socket. Lay the cable in the grey
area beside the batteries. When replacing the
batteries, only use ones of the same type.
Close the battery compartment.
Charging the batteries
Before the handset is used for the first time, insert it in the base station/charging station for
at least 14 hours.
When the handset is inserted in the base station properly, you will hear a confirmation si-
gnal and the charge control lamp lights up. The handset warms up during the charging
process. This is normal and does not represent a risk. Do not charge the handset with
charging units from other manufacturers. The current battery charge status is indicated
on the display:
Setting the time on the handset
The information on Page 38 explains how to set the time on the handset.
Private branch exchanges
The information on Page 35 explains how to install your telephone in a private branch ex-
change.
28
18
You can insert the handset in the base station when the display is flapped open
or closed.
Full Half empty Low Empty