KERN MTA 400K-1NM Bedienungsanleitung Seite 68

3. Data output format
4. Printer type
After the data output format has been confirmed, the currently set
printer type will be displayed.
Select the desired printer type by
LP -50
tPUP
bl on
bl oFF
Background
illumination
bl AU*
of display
Pin
Service menu
Operate adjustment switch; for position see chap.17
15*
30
Display speed
60
7.5
28
(P Prt, P Auto, P Cont settings only)
the currently set data output format will be shown after the
baud rate was confirmed. Select desired format by
confirm with .
Prt 0-3 Data output format, see chap. 13.3
Cont 1 Default
Cont 2 Not documented
Cont 3 Not documented
Not documented
Use this setting
Back lighting for display on
Display background illumination off
Backlighting for display will come on automatically as
soon as the weighing scale is operated.
Password Input: Press
subsequently.
Not documented
and
Sd0 – on/off
Continuous data output,
selectable „sending 0", yes / no
and confirm by .
, ,
MTA-BAPS-e-1711