Eurosystems Sandy Bedienungsanleitung Seite 10

List of contents
Introduction
Conditions of use
Identification data
Safety norms
Assembly
Adjustments
Maintenance
Technical Details
noise and vibration level
Fault
Serious risk for operator and
bystander safety.
USE CONDITIONS–USE LIMITS:
maintenance of synthetic turf with its rotary brush, rotating in the direction of travel, the motor-brush
lifts the synthetic wire grass and levels the bottom of the field. Any use, different from the above
mentioned ones is illegal and implies the warranty lost and also a serious danger for the operator
and the people in the neighbourhood.
SAFETY PRECAUTIOnS & ACCIDEnT PREVEnTIOn MEASURES
Both on the machine body and in the present instructions booklet can be found
indications and notices linked to the a.m. symbol: in such cases please be careful
because you can face potential danger so it is recommended to use a special caution
both for operator's own sake and bystanders'.
WARNING! Before assembly and putting the machine into operation, please read carefully the
operating instructions. Persons not familiar with such instructions are not authorized to use the
machine.
1. Persons who are not familiar with the operating manual, as well as children, adolescents
under the age of 16 and persons under the influence of alcohol, drugs or medication must
not operate the mower.
2. When operating the machine , the user should ensure that there is no-one within the
immediate closeness, particularly children. Always remember that you are responsible for
the safe operation of your machine towards a third person.
3. use the motor-brush only in daylight or in good artificial light. Visibility is essential to
guarantee safety conditions.
Translation of original user instructions
InTRODUCTIOn
Dear Customer,
Firstly, we wish to thank you for having chosen our products and
hope that the use of this machine will be extremely satisfying
for you and fully meet your expectations. This manual has been
drawn up to allow your to get to know your machine well and
use it in safe and efficient conditions; please do not forget that
it is an integral part of the machine and keep it to hand to be
consulted at all times and consign it with the machine if you
should sell or lend it to others.
Your new machine has been designed and manufactured
according to current standards and it is safe and reliable if
used in full respect of the instructions contained in this manual;
any other use or failure to comply with the instructions for
a safe use, maintenance and repair shall be considered as
"improper use", causing the warranty to become null and void
and relieve the Manufacturer from all responsibilities, with
the user becoming responsible for charges for damages or
personal or third party injury.
If any slight differences are found between the description
herein and the machine you own, please bear in mind that due
to continual product improvements, the information contained
in this manual is subject to modification without prior notice
or obligatory updating, although the essential features for the
purposes of safety and operation remain unchanged. In the
event of doubt, please contact your dealer.
IDENTIFICATION DATA (fig. 1) :
the unit data and the serial number is slicked to the back of the
frame (right). ATTENTION : the serial number of the machine
is necessary to get technical support or to order spare parts.
the motor-brush is designed and manufactured for the
EN
the label (C) with
11