Assembling And Using The Vacuum Cleaner - Rotel Alpine690Ch1 Gebrauchsanweisung

• ASSEMBLING AND USING THE VACUUM CLEANER

Ensure that the vacuum cleaner is switched off and disconnected from the mains sup-
o
ply before assembling.
Insert the hose connector into the socket on the main body of the cleaner and turn it
o
clockwise until it clicks into position (Fig. 1).
Fit the the telescopic tube into the handle until it clicks into position (Fig. 2).
o
Insert the other end of the telescopic tube into the nozzle required: For example, the
o
universal nozzle (A) for carpet or floor.
Remove the battery cover (E) and insert two AAA batteries.
o
Unwind the mains cable and plug it into a socket. Press the On/Off foot switch
o
(Fig. 3).
Press the power button on the remote control of the handle (F).
o
The unit will start at the MAX level 4, the level is shown on the LED display.
o
The level can be changed by pressing "+" / "-" on the remote control of the handle
o
(F) or the main body.
Switch off the unit by pressing the power button on the remote control of the handle
o
(F) or the On/Off foot switch (I).
Unplug the mains cable and rewind it by pressing the foot switch for automatic cord
o
rewind (Fig. 4).
1
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
2
27
3 4