Unpacking The Unit, Checking And Storing; Handling; Description Of The Unit (Fig. 1); Name Plate (Fig. 2) - Carrier 42KY serie Bedienungsanleitung

1. UNPACKING THE UNIT, CHECKING AND STORING

Thank you for purchasing a CARRIER unit. We trust that this unit will give you complete satisfaction.
To ensure correct operation, all connections (electrical, hydraulic, etc.) must be made in accordance with best industry practice
and the regulations in force in the country of use.
Your unit must be maintained as recommended in this manual.
The unit is delivered in two separate packages.
- An air treatment module,
- An air supply / return grille,
A label on the packaging describes the unit specification. (type, model, etc.)
Each device bears a data plate. Include the reference number shown on the data plate in all correspondence.
It is the recipient's duty to inspect the contents of the packages upon receipt:
• In the event of missing items, the customer must provide the exact number of parcels delivered.
• If any damage is found on delivery, report it on the delivery receipt in the presence of the delivery driver before the delivery note is
signed.
IMPORTANT: Claims for shortages or damage must be reported within three business days of receipt. The client must inspect
the goods in the presence of the driver. Damage / shortages must be noted at time of delivery and described in detail.

2. HANDLING

For your safety, wear protective gloves when handling.
Important: the unit must be handled with care and stored flat. Impacts may cause damage to the frame or the body of the unit
and adversely affect its main functions and its appearance.
The unit should preferably be lifted using the brackets. It is possible to carry out the installation using a fork-lift truck, as long as care is
taken not to damage the unit.
The unit is placed inside the suspended ceiling. The unit must be fixed to the ceiling using 4 threaded rods (not supplied) on the
4 support brackets.

3. DESCRIPTION OF THE UNIT (Fig. 1)

a - Heat exchange coil
b - Fan motor assembly
c - Electrical box
d - Main condensate drain pan
e - Auxiliary condensate drain pan
f - Condensate drain
g - Support brackets

3.1. Name plate (Fig. 2)

1 - Code
2 - Serial number
3 - Description of the unit
4 - Rated motor power
5 - Motor rotation speed
6 - Coil type
The data plate contains all the information required to identify the unit and its configuration. This plate is positioned on the side
containing all the connections, above the fresh air inlet.
Before contacting us, please note the serial no. and the designation.
Important:
This device may be used by children aged eight and over, and by persons with limited physical, sensory or mental capabilities,
or by persons with insufficient experience or knowledge, provided that they are being correctly supervised or provided they
have received instructions on how to use the device in complete safety, ensuring that they have a full understanding of any
risks involved. Children must not be allowed to play with the device. User cleaning and maintenance must not be performed
by children.
During normal use, this device is intended to operate under the following site conditions:
- Maximum altitude: 2000 m,
- Minimum and maximum storage temperatures; -20°C + 65°C,
- Minimum and maximum operating temperatures; 0°C + 40°C,
- Indoor return air maximum humidity level 27°C DB (dry bulb) at 65% RH (relative humidity).
- Clean interior environment (no corrosive substances present)
The device is designed for indoor use and requires protection from any form of impact during use. Protection rating IP 20 IK02.
This device is designed to operate in an over-voltage category II and pollution degree 2 environment, in accordance with IEC
standard 664-1. To ensure a pollution degree 2 environment, the device must be protected from water and oil splashes, and the
dust allowed to settle on it must be limited.
h - Air filter
j - Air supply / return grille
k - Fresh air inlet
7 - Wiring diagram reference
8 - Motor speed wiring
9 - Maximum service pressure
10 - Electric heater specifications (if fitted).
11 - EC declaration number
12 - Refer to the installation manual
EN - 1
EN