Appliance Self-Test; Starting The Appliance Self-Test; Ending The Appliance Self-Test; Customer Service - Koenic KCB34806-s Gebrauchsanleitung

en
Fault
The temperature in
the freezer
compartment is too
warm.

Appliance self-test

Your appliance features an automatic
self-test program which shows you
sources of faults which may be repaired
by customer service only.

Starting the appliance self-test

1. Switch off the appliance and wait 5
minutes.
2. Switch on the appliance and hold
down the temperature selection
button, Fig. 2/4, for 3–5 seconds
within the first 10 seconds until 2 °C
is lit on the refrigerator compartment
temperature display.
The self-test programme starts, when
the temperature displays lit up in
succession.
When after a short time the appliance
displays the set temperature prior to the
self-test, everything is ok.
If the Super display flashes for 10
seconds, an error has occurred.
Inform customer service.
36
Possible cause
Appliance opened
frequently.
The ventilation
openings have been
covered.
Large quantities of
fresh food are being
frozen.
Remedial action
Do not open the appliance
unnecessarily.
Remove obstacles.
Do not exceed max. freezing
capacity.

Ending the appliance self-test

When the programme has ended, the
appliance switches over to normal
operation.

Customer service

If you have any questions please do not
hesitate to contact our customer service.
Contact data can be found in the
enclosed warranty. Please provide
customer service with the appliance
product number (E-Nr.) and production
number (FD).
These specifications can be found on
the rating plate. Fig. 0
To prevent unnecessary call-outs, please
assist customer service by quoting
the product and production numbers.
This will save you additional costs.
Repair order and advice
on faults
Contact data for the respective countries
can be found in the enclosed warranty.