Switching On The Appliance; Setting The Temperature; Usable Capacity - Koenic KCB34806-s Gebrauchsanleitung

en
Switching on
the appliance
Switch on the appliance with the On/Off
button. Fig. 2/1
The appliance begins to cool. Light is
switched on when the door is open.
Operating tips
When the appliance has been
■
switched on, it may take several hours
until the set temperatures have been
reached.
Do not put any food in the appliance
beforehand.
The sides of the housing are
■
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
If the freezer compartment door
■
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
26
Setting
the temperature
Fig. 2
Refrigerator compartment
The temperature can be set from +2 °C
to +8 °C.
Keep pressing temperature selection
button 4 until the required refrigerator
compartment temperature is set.
The value last selected is stored.
The set temperature is indicated
on display 2.
We recommend a factory setting
of +4 °C in the refrigerator compartment.
Perishable food should not be stored
warmer than +4 °C.
Freezer compartment
The temperature in the freezer
compartment depends on
the temperature in the refrigerator
compartment.
Lower temperatures in the refrigerator
compartment also cause lower
temperatures in the freezer
compartment.

Usable capacity

Information on the usable capacity can
be found inside your appliance on
the rating plate. Fig. 0