Changing The Door Handle; Fitting The Wall Spacer; Aligning The Appliance - Koenic KUF 22606nf Montageanleitung

en
Changing the door
handle
(if required)
Fig. 4
Change the door handle in numerical
sequence.

Fitting the wall spacer

Fig. 5
If available:
Fit wall spacers to obtain the indicated
energy absorption of the appliance.
A reduced wall gap will not restrict the
function of the appliance.
The energy absorption may then change
slightly.
8

Aligning the appliance

Place the appliance in the designated
location and align. The appliance must
be level. If the floor is uneven,
use the front height-adjustable feet.
Adjust the height-adjustable feet with
a wrench.
Note
The appliance must be upright.
Please align it with a spirit level.
SW 22