Installation - Audiotec Fischer Match UP 7BMW Bedienungsanleitung

Installation

Fig. 1: Pin configuration of the System Connector 1 and 2
21 22 23 24
25 26 27 28
System Connector 1
1.
Highlevel loudspeaker input rear left (-)
2.
Highlevel loudspeaker input front left (-)
3.
Highlevel loudspeaker input front right (-)
4.
Highlevel loudspeaker input rear right (-)
5.
Loudspeaker output rear right (-)
6.
Loudspeaker output rear left (-)
7.
Loudspeaker output front right (-)
8.
Loudspeaker output front left (-)
9.
Ground
10.
Ground
System Connector 2
21.
Not used
22.
Subwoofer output right (-)
23.
Subwoofer output left (-)
24.
Loudspeaker output center (-)
Fig. 2: Pin assignment Power Input plug
Plug top side
20
1 2 3 4 5 6 7
11 12 13 14 15 16 17 18 19 20
11.
Highlevel loudspeaker input rear left (+)
12.
Highlevel loudspeaker input front left (+)
13.
Highlevel loudspeaker input front right (+)
14.
Highlevel loudspeaker input rear right (+)
15.
Loudspeaker output rear right (+)
16.
Loudspeaker output rear left (+)
17.
Loudspeaker output front right (+)
18.
Loudspeaker output front left (+)
19.
+12 Volts
20.
+12 Volts
25.
Remote In
26.
Subwoofer output right (+)
27.
Subwoofer output left (+)
28.
Loudspeaker output center (+)
+12 V - for connecting the UP 7BMW to the positive
A
terminal of the car´s battery.
GND - for connecting the ground cable.
B
REM - remote input for connecting the amplifier to the
C
remote output of the signal source.
8 9 10