Audiotec Fischer Match UP 7BMW Bedienungsanleitung Seite 24

Connection to a PC / Installation of sound setups
The DSP PC-Tool software enables the installation
of car-specific sound setups and their subsequent
adjustment to individual requirements as well as a
free configuration of the UP 7BMW amplifier.
The user interface is designed for easy handling
and allows extremely precise sound adaptation,
even under difficult conditions.
Prior to connecting the amplifier to your PC visit our
website and download the latest version of the
DSP PC-Tool software. Check from time to time for
software updates. You will find the software and the
respective user manual on www.audiotec-fischer.
com. We strongly recommend to carefully read the
user manual (Sound Tuning Magazine) before us-
ing the software for the first time in order to avoid
any complications and failures.
Important: Make sure that the amplifier is not con-
nected to your computer before the software and
USB driver are installed!
In the following the most important steps how to
connect and the first start-up are described:
1. Download the latest version of the DSP
PC-Tool software (available on our website
www . a udiotec-fischer.com) and install it on
your computer.
2. Connect the amplifier to your computer using
the USB cable that is included in delivery. If you
have to bridge longer distances please use an
active USB extension cable with integrated re-
peater and no passive extension.
3. Turn on the amplifier and start the software after
the Status LED lights up green. The operating
software will be updated automatically to the
latest version if it is not up-to-date.
4. Now you are able install a car-specific sound
setup onto the amplifier or to configure your
MATCH UP 7BMW with our intuitive DSP PC-
Tool software.
Note: We strongly recommend to use one of
our car-specific sound setups as a basic set-
ting to avoid damage to the amplifier, the loud-
speakers or other connected devices. Inter-
esting and useful hints for configuring a sound
setup can be found e.g. in our "Sound Tuning
Magazine", which can be downloaded for free
from our website.
24
Caution: We highly recommend to set the volume
of your head unit / car radio to minimum position
during first start-up. Additionally no devices should
be connected to the Line Out until general settings
in the DSP PC-Tool software have been made.
Especially if the UP 7BMW will be used in fully ac-
tive applications, a wrong setup can destroy your
speakers right away.
Installation of car specific sound setups
Read in the following the steps how to install
a car-specific sound setup to the DSP of the
UP 7BMW:
1. Download
a
up from the
( www . a udiotec - fi scher . c om). The database can
be found under the menu item MATCH → Sound
Setups.
2. Then select your device, vehicle make and
model. Next you can choose an appropriate
sound setup file from the list and download it.
3. Now connect the UP 7BMW to your computer,
as described before, and start the DSP PC-Tool
software.
4. Load the previously downloaded sound setup
file into the DSP PC-Tool software.
5. Optionally you can now customize the sound
setup with the DSP PC-Tool to your needs.
6. Once you have made all the settings, save the
sound setup on the DSP of the UP 7BMW.
car-specific sound
Audiotec Fischer website
set-