Checking The Connections; Basic Operations; Selecting The Component - Sony STR-SL5 Bedienungsanleitung

Checking the connections

After connecting all of your components to the
receiver, do the following to verify that the
connections were made correctly.
1
Press ?/1 to turn on the receiver.
2
Press a function button to select a
component (program source) that you
connected (e.g., DVD player).
3
Turn on the component and start
playing it.
4
Rotate MASTER VOLUME to turn up the
volume.
If you do not obtain normal sound output after
performing this procedure, see
"Troubleshooting" on page 27 and take the
appropriate measures to correct the problem.
Switching the setting of fan control
Hold down PLII button and press ?/1 to change the
fan control setup. Each time you do the procedure
above, the following setup appears.
Select To
FAN ON* Turn on the fan at all times.
FAN AUTO Turn on the fan automatically
when there is sufficient speaker
output.
* Initial setting.

Basic Operations

Selecting the component

Function buttons
Press a function button to select the component
you want to use.
To select
VCR
DVD player
TV or digital
satellite tuner (etc.)
Tuner
After turning on the component you selected,
select the component and play the program
source.
MUTING
Press MUTING to mute the sound. MUTING
appears on the display when the sound is
muted. To cancel muting, press it again or turn
up the volume.
The muting function is also canceled when
turning the power off, or disconnecting the
power cord.
Press
VIDEO
DVD
TV/SAT
TUNER
17
GB