Sony STR-SL5 Bedienungsanleitung Seite 13

Specifying the speaker
parameters
1
Press MAIN MENU repeatedly to select
the SET UP menu.
2
Move the V/v/B/b button up or down
to select the parameter you want to
adjust.
3
Move the V/v/B/b button to left or
right to select the setting you want.
4
Repeat steps 2 to 3 until you have set
all of the parameters that follow.
Initial settings
Parameter
(FRONT)
L R
(CENTER)
C
(SURR)
SL SR
S.W. XXX (SUB WOOFER) YES
SW
DIST. XX.X m
L R
DIST. XX.X m
C
DIST. XX.X m
SL SR
PL. XXX
SL SR
HGT. XXX
SL SR
Tips for the speaker settings
When you use micro satellite speaker system, you can
easily adjust the settings for the speaker size and sub
woofer selection. Turn off the power, then turn on
again while pressing the MUTING button. "MICRO
SP." appears in the display and the speaker size and
the sub woofer selection are fixed to the following
settings.
Speakers
Front
Center
Surround
Sub woofer
You cannot change the configuration if you choose
MICRO SP.
To reset to the normal settings, turn off the power,
then turn on again while pressing the MUTING
Initial setting
button.
LARGE
LARGE
x Front speaker size (
LARGE
• If you connect large speakers that will
5.0 m
• If the sound is distorted, or you feel a lack of
5.0 m
5.0 m
BEHD.
LOW
• When the front speakers are set to "SMALL",
Settings
SMALL
SMALL
SMALL
YES
effectively reproduce bass frequencies, select
"LARGE".
surround effects when using multi channel
surround sound, select "SMALL" to activate
the bass redirection circuitry and output the
front channel bass frequencies from the sub
woofer.
the center and surround speakers are also
automatically set to "SMALL" (unless
previously set to "NO").
)
R
L
continued
GB
13