Getting Started; Using Checkme; Prior To Use - Viatom Checkme Lite Benutzerhandbuch

Press an icon in the Main Screen will start a measurement, activate a function, or open
corresponding menu.
The device will enter Main Screen when:
No operation is detected for 60 seconds in result screen, the device will

automatically switch to Main Screen.
Pressing the Home button in other screen interface.

You can change the sound volume by taping the
then tap the <Volume> area. Or you can also go to the Setting menu to change it.
1.4 Symbols
Symbol Meaning
Application part type BF
Manufacturer
CE0197 In conformity with Directive 93/42/EEC
European Representative
Symbol for "ENVIRONMENT PROTECTION – Waste electrical products
should not be disposed of with household waste. Please recycle
where facilities exist. Check with your local authority or retailer for
recycling advice".
Against ingress of solid foreign objects ≥12.5mm diameter; Against
IP22
dripping (15° tilted)
Follow operating instructions
No alarm system.
2.

Getting Started

2.1 Power On/Off
Press the Home button to power on the device. Press and hold Home button for 2
seconds to power off the device.
2.2 Initial Settings
The first time when the Checkme is powered on, you can set up your Checkme step by
step. You can also change the settings in the <Settings> menu.
3.

Using Checkme

3.1

Prior to Use

Before using ECG
Before using Daily Check or ECG Recorder function, pay attention to the following points
in order to obtain precise measurements.
If your skin or hands are dry, moisten them before taking the measurement.

button on the left of the screen,
4