Electromagnetic Compatibility - Viatom Checkme Lite Benutzerhandbuch

within the specified accuracy range compared to CO-oximeter measurements.
SpO2 range
SpO2 Accuracy (Arms)
PR range
PR accuracy
PI range
Measurement summary
Blood Pressure Variation
Measurement method
Measurement summary
Review
Waveform review
Storage
8.

Electromagnetic Compatibility

The device meets the requirements of EN 60601-1-2. All the accessories also meet the
requirements of EN 60601-1-2 when in use with this device.
Warnings and Cautionary Advices
Using accessories other than those specified in this manual may result in

increased electromagnetic emission or decreased electromagnetic immunity of
the equipment.
The device or its components should not be used adjacent to or stacked with

other equipment.
The device needs special precautions regarding EMC and needs to be installed

and put into service according to the EMC information provided below.
Other devices may interfere with this device even though they meet the

requirements of CISPR.
When the inputted signal is below the minimum amplitude provided in technical

specifications, erroneous measurements could result.
Portable and mobile communication equipment may affect the performance of

this device.
Other devices that have RF transmitter or source may affect this device (e.g. cell

phones, PDAs, and PCs with wireless function).
Guidance and Declaration - Electromagnetic Emissions
The Health Monitor is intended for use in the electromagnetic environment specified below. The
customer or the user of the device should assure that it is used in such an environment.
Emission tests
70% to 100%
80-100%:±2%, 70-79%:±3%
30 to 250 bpm
±2 bpm or ±2%，whichever is greater
0.5-15
SpO2, PR, PI, Summary (Normal Blood Oxygen, Low
Blood Oxygen, Unable to analyze)
Cuff-free non-invasive technology
systolic pressure based on individual calibration
coefficient
Full disclosure waveform
100 pcs of records
Compliance Electromagnetic environment - guidance
13