Velleman K3511 Bedienungsanleitung Seite 5

CONNECTION
The alarm can be connected up in different ways depending on the type of sensors
connected to it. Different combinations of the connectors described below are possible.
ATTENTION: When feeding the wires through the chassis use the rubber
grommets supplied.
Explanation of the connections:
Connection of the IR receiver module (only for K3512):
Vo
GD
WS
DS
CL
+V
RX
For the colours see the
-V
corresponding indications on
the receiver PCB.
+L
-L
+12V in
Ground
Right indicator
Left indicator
Contact 1 in
Contact 2 in
To door lock
Warning output
Interior sirene -
Interior sirene +
Exterior sirene/pager
output
Ventilator input
K3511 / K3512 Car alarm
Infrared receiver
module
+12V output
Ground output
Warning detectors in.
Direct sensors in.
Code lock input
IR +9V out
IR code in
IR ground
Dashboard LED +
Dashboard LED -
Connection
interior siren, hazard warning
lights and
central locking system (use
the cables supplied):
of supply,
perhaps the
5