Velleman K3511 Bedienungsanleitung Seite 13

In order to be able to determine which input, if any, has been triggered, a special
function has been built in which, after deactivation of the alarm,
can determine which sensor input has been triggered. This takes place as follows:
•
Deactivate the alarm, if it has been triggered 4 tones will be heard and the
hazard lights will flash 4 times
•
The dashboard LED will flash rapidly to indicate automatic reset after 60
seconds.
•
Open the door or start up to interrupt the reset.
•
Depending on what the cause was, the dashboard LED and the internal siren
will:
Switch on and off once if a direct sensor alarm has been activated.
Switch on and off twice if a delayed sensor alarm has been activated.
Switch on and off 3 times if the voltage drop detector has been activated.
13