Wall Mount - Sanus VTM6 Handbuch

Wall Mount

Solid Concrete or Concrete Block
1
Place the wall plate [02] on the wall and mark
the hole location.
CAUTION:
property damage!
 Mount the wall plate [02] directly onto the
concrete surface.
 Minimum solid concrete thickness: 203mm
(8 in.).
 Minimum concrete block size: 203 x 203 x
406 mm (8 x 8 x 16 in.).
6
Avoid potential injuries or
[02]
2
CAUTION:
property damage!
 Pilot holes MUST be drilled to a depth of
63.5 mm (2½ in.) using a 6 mm (1/4 in.)
diameter drill bit.
 Never drill into the mortar between blocks.
63.5mm
(2½ in.)
6 mm
(1/4 in.)
Avoid potential injuries or