Thermalright TRUE Spirit 90M Rev.A Bedienungsanleitung Seite 10

Step 4:
1
Step 4 : Place the Anchoring Mount on the Screw Nuts.
Use the four M3L6 Screws to fix the Anchoring Mount on to the Screw Nuts.
Step 5:
Step 5 : Applying Thermal Paste.
Apply the Thermal Paste to the base of the Heatsink
and the surface of the CPU evenly.
Step 7:
Step 5 : Fan Installation
Place the included 92mm Fan onto the Heatsink
body. And then secure it with the 92mm Fan
Clips, by pulling the Fan Clips to place the four
ends at the four holes on the 92mm Fan.
7
4
2
3
Step 6:
Step 5 : Fan Installation
Pass one end of the Fan Clip through the
mounting hole of the 92mm Fan. Hook the
Fan Clip through the Fan Clip Slot. Pass the
end of the Fan Clips through the mounting
hole of the 92mm Fan. Repeat the procedure
with the Fan Clip on the 92mm Fan.
Step 8:
Step 6 : Installation Completed
Plug in the fan connector to the CPU PWM
Fan socket on the motherboard. Installation
complete.