Basic Settings - auna Karaboom 100 Sing Anleitung

BASIC SETTINGS

Connection to the mains supply
• Make sure that the power voltage corresponds to the voltage printed
on the back label.
• Risk of electric shock! When you unplug the AC power cord always pull
the plug from the socket. Never pull the cord.
• Before connecting the AC power cord, ensure you have completed all
other connections.
• Place the unit in the desired position and unravel the mains cable. Insert
the cable into the supply socket and switch on if applicable
Auto Standby
When playing media from a connected device, the Tower automatically
switches to standby if:
• No button is pressed for 10 minutes,
• No audio from a connected device for 10 minutes.
Setting Clock
After the unit is plugged into a mains supply or mains power failure, the
display will show the [00:00] on the LED display. The unit should be in
standby mode to set the current clock.
1 Press TIME button, the digits for the display will blink.
2 Press the FORWARD/BACK button repeatedly until correct hour is set.
3 Press the TIME to confirm the hour setting, the minute digits on the
display will blink.
4 Press the FORWARD/BACK button repeatedly until correct minute is
set. Press the TIME/ALARM to confirm the minute setting.
EN
19