Cleaning And Care - Klarstein 10030266 Bedienungsanleitung

Operation
It is recommended that you installed the wine cooler in a place where the ambient temperature is between
10-26°C .If the ambient temperature is above or below recommended temperatures, the performance of the
unit may be affected. For example, placing in extreme cold or hot conditions may cause interior temperature
to fluctuate. The range of 7-18°C may not be reached. The temperature may fluctuate depending on whether
or not the interior light is on or off or whether the bottles are located on the upper, middle or lower section.
How to set the temperature:
There is mechanical control inside cabinet, rotate the knob to adjust temperature.
1 Light button
2 Temperature adjust knob
3 LED
• There is TEMP-ADJ knob inside of wine cooler. The temperature is ad-
justed in the range if 7-18°C in the cabinet.
• The TEMP-ADJ button is set certain point when the cellar is off the
assembling line. When you want to low down the temperature in the
cabinet, please turn the TEMP-ADJ knob from left to right for cooling
capacity of 'High" to "Medium" to "Low". In first use of the wine cooler,
turn the knob to "High" to low down the temperature quickly.
• There is light switch in the control control panel, push to set the light on/off.
Cleaning your wine cooler
• Unplug the wine cooler and remove the bottles.
• Wash the inside with a warm water and baking soda solution. The solution should be about 2 tablespoons
of baking soda to a quart of water.
• The outside of wine cooler should be cleaned with mild detergent and warm water.
• Draw out the water box at the bottom, and wash.
Moving your wine cooler
• Remove all the bottles.
• Securely tape down all loose items inside your wine cooler.
• Turn the leveling legs up to the base to avoid damage.
• Tape the door.
• Be sure the wine refrigerates stays in the upright position during transportation.

Cleaning and Care

9