Product Description; Use And Operation - Klarstein 10030266 Bedienungsanleitung

1 Light switch
2 Control knob
3 Fan mask
4 Shelf
5 Foot
6 Water tray
7 Upper hinge
8 Upper cover
9 Door seal
10 Handle
11 Glass door
12 Lower hinge
13 Lower cover
Befor first Use
• Remove the exterior and interior packing
• Check to be sure all parts are included.
• Before connecting the appliance to the power source, let it stand upright for approximately 2 hours. This will
reduce the possibility of a malfunction in the cooling system from handling during transportation.
• Leave 5 cm of space between the fridge and the wall on the sides. At the back, the distance to the wall
should be 10 cm.
• Clean the interior surface with lukewarm water using a soft cloth.
• Place your appliance on a floor that is strong enough to support the appliance when it is fully loaded. To level
your appliance, adjust the front legs at the bottom of the appliance.
• For recedes installation away from direct sunlight and sources of heat (stove, heater, radiator, etc.).Direct
sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold
or hot ambient temperatures may also cause the appliances not to perform properly.
• Not designed for placement in adage or basement.
• The appliance is for indoor use only.
• Caution: Please keep the appliance away from substance, which can cause ignition.
8

Product Description

Use and Operation