Installation Manual; Controller Installation; Installation Onto Mixing Valve - Inocal PROMATIC CMP25-2 Bedienungsanleitung

CONTROLLER INSTALATION
Install the controller in dry room, where it is not directly exposed to strong electromagne-
tic fields. Press the controller directly onto the mixing valve. Disassembling or opening
of the controller is not needed and not allowed.

INSTALLATION ONTO MIXING VALVE

Installation example shown on the picture bellow is valid for mixing valves of the following
manufacturers: Esbe, Seltron, Somatherm, Acaso, Ivar, Wip, Paw, BRV, Imit, Hora, Bar-
beri, Olymp, Hoval.
Example of installation onto 3 way mixing valve.
Example of installation onto 4 way mixing valve.
The mixing valve needs to be turned in the middle position.

INSTALLATION MANUAL

37
1a 1a
1b
Installation manual