Safety Information; Field Of Application; Transport And Handling; Before Commissioning - Seto ALDEBARAN XLD Compact Gebrauchsanleitung

Safety information

This quality light was built according to the rules
of technology. The light was built, tested and
delivered in proper condition. To maintain this
condition and to ensure safe operation, the user
must follow the instructions and warnings of the
operating instructions.
If it is to assume that safe operation is no longer
possible, the lamp must be taken out of service.
It is to assume that a safe operation is
not possible
• if the illuminant shows visible damage
• if the illuminant is no longer working
properly
• after prolonged storage under inconveni-
ent conditions
• after extreme transport damage
In these cases, the luminaire must be sent in for
repair.
Repairs to the luminaire must be carried out only by
the manufacturer, his customer service department
or a qualified electrician. A qualified electrician has
the professional training, knowledge and experience,
as well as knowledge of the pertinent standards, to
assess the work they are required to carry out and re-
cognize possible hazards. Warranty repairs are carried
out only by the manufacturer.

Field of application

ALDEBARAN - luminaires are applicable as indoor
®
lighting and, depending on the model and product,
also as outdoor lighting for industry, crafts, work-
shops, tents, rescue services, energy suppliers, rail
and road transport etc. ALDEBARAN
developed to offer you optimal illumination directly
at the workplace.
For mounting and dismounting (installation) of the
lamp, use the 4 handles on the corners. This ensures
safe handling.
Daily check of the product for damage! This redu-
ces the risk of accidents significantly.
Daily check of the area below and above the LED
modules for free air flow!
The ALDEBARAN
connected to alternating current (AC) – with voltage
according to type plate – to a properly installed
protective contact socket. Please make sure that your
installation meets the relevant VDE guidelines.
If you have any questions concerning this, please
refer to your energy supplier or your qualified elec-
trician.
Of course we are also available for your questions.
When the luminaire is operated with other connec-
tor systems (not Schuko
the type plate is to be considered.
Lay the cables in a way that no trip hazards occur
and that they are safe from mechanical damages
luminaires are
®
like tearing off or running over. If necessary, fix the
cables with adhesive tape or cable ties.
•
Transport und Handling

Before commissioning

ATTENTION!
CAUTION!

Commissioning

XLD COmpACT is only to be
®
ATTENTION!
), the voltage according to
®
WARNING! Tripping hazard!
Make sure that the luminaire is set up and
fixed safely before use.
11