EBARA Press-o-Matic Bedienungsanweisung Seite 2

WARNING:
READ THIS HANDBOOK CAREFULLY BEFORE INSTALLING OR STARTING
THE DEVICE.
Installation (electrical and hydraulic connections) and maintenance of this device must be
performed by qualified personnel who satisfy the technical requirements indicated by the safety
standards in force in the country of installation and who are capable of fully understanding the
contents of this instruction manual.
All operations performed with the device's cover removed must be carried out with mains power
disconnected.
Removal of the electronic board is not permitted. Note that voltage remains on some of its parts
for several minutes after it has been disconnected from the electrical power supply.
The manufacturer accepts no responsibility for personal injury or damage to property deriving
from failure of any of the internal protection devices to operate, apart from compensation for the
appliance itself if still covered by warranty.
The manufacturer guarantees the product in accordance with current applicable laws. The device
must be returned together with this instruction manual, stating on the last page the date of
installation and the values of the programmed parameters.
The warranty is invalidated in the event that the device is tampered with, dismantled or damaged
due to improper use and/or incorrect installation, if it is used for applications for which it was not
intended, if it is installed in unsuitable environmental conditions or if it is connected to an
electrical system that does not comply with the relevant standards.
The manufacturer will accept no responsibility for personal injury or damage to property caused
by failure to install the necessary electrical protection devices upstream of the appliance or due
to inadequate installation.
IMPORTANT:
This device has been tested in accordance with the rules of electromagnetic compatibility for
industrial environments. If used in a residential environment, the electrical connection must be
made exclusively by a person qualified to install electrical systems taking account of
electromagnetic compatibility requirements
This equipment complies with the ROHS 2002/95/EC directive.
The symbol of the crossed out bin means that to safeguard the environment the equipment
cannot be disposed of with other household waste at the end of its lifecycle. The equipment
and packaging must be disposed of according to the local regulations.
20