Technical Characteristics; Technical Specifications - Makita SG150 Bedienungsanleitung

Technical Characteristics
3
3.1 Technical specifications
Diamond channel cutter type
Manufacturer
Operating voltage (V / Hz)
Power consumption (watt)
Protection class
Speed (min )
-1
Disc diameter (mm)
Max. disc thickness (mm)
Cutting width (mm)
Cutting depth (mm)
Weight (kg)
Machine
1)
Cutting disc
Speed electronics
Sound measurement
2)
(sound pressure) dB (A)
L
pA
(sound power) dB (A)
L
WA
Vibration measurement:
Front handle (11)
1
Rear handle (2)
1
Weight without insert tool and connection cable.
1)
Measured values for noise determined according to EN 60745. Wear hearing protection!
2)
Total vibration values (vector sum in three directions) determined according to EN 60745.
3)
The vibration emission values given in this
instruction manual have been measured according
to a method of measurement standardised in
EN 60745 and can be used for comparison between
power tools. They are also suitable for a preliminary
estimate of the vibratory stresses.
The vibration emission values given represent the
main applications of the power tool. If the power
tool is used for other applications, with different
insert tools or are insufficiently serviced, this can
significantly increase the vibratory stresses over
the whole work period. For a precise estimate of the
vibration emission values, the times during which
the tool is switched off or is running but not actually
in use should also be taken into account. This can
reduce the vibration stresses over the whole work
period significantly.
K = 3 dB
K = 1.5 m / s
3)
m / s
2
m / s
2
SG150
MAKITA INTERNATIONAL EUROPE LTD.
~230 / 50 / 60
1800
/ II
7800
150
3.5
7 – 35
7 – 45
5.6
0.220
Yes
95
106
2
2.79
3.73
wARNING
Health risk due to vibrations.
Î Additional safety measures should be taken
to protect the user, e.g. wearing anti-vibration
protective gloves, correct maintenance
of power tools and insert tools, keeping
hands warm and good organisation of work
sequences.
SG180
1800
/ II
4100
185
3.5
9 – 43
15 – 60
6.6
0.380
Yes
99
110
2.11
3.24
| 69 |