Declaration Of Conformity And Installation - Novoferm B-1200 Montageanleitung

Declaration of conformity and Installation

In accordance with the:
• Machinery Directive 2006/42 / EC
• Low voltage directive 2014/35 / EU
• Directive on electromagnetic compatibility 2014/30 / EU
• RoHS Directive 2011/65 / EU
developed, constructed and manufactured.
The following standards were applied:
• EN ISO 13849-1, PL "C" Cat. 2
• EN 60335-1, as applicable
• EN 61000-6-3
• EN 61000-6-2
• EN 60335-2-95
• EN 60335-2-103
The following requirements of Annex 1 to the Machinery Directive 2006/42 / EC shall be complied with:
1.1.2, 1.1.3, 1.1.5, 1.2.1, 1.2.2, 1.2.3, 1.2.4, 1.2.5, 1.2.6, 1.3.1, 1.3.2, 1.3.4, 1.3.7, 1.5.1, 1.5.4, 1.5.6,
1.5.14, 1.6.1, 1.6.2, 1.6.3, 1.7.1, 1.7.3, 1.7.4
The specific technical documentation has been prepared in accordance with Annex VII, Part B, and will
be transmitted electronically to the authorities upon request.
The incomplete machine is only intended for installation in a gateway in order to form a complete machine
as defined in the Machinery Directive 2006/42 / EC. The gateway must not be put into operation until it
has been ascertained that the entire system complies with the provisions of the EC Directives.
The integrated radio system complies with the Directive 2014/53 /EU.
The full text of the Declaration of Conformity is available at the following Internet address
www.tormatic.de/nc/downloads.html
Only use genuine spare parts of the manufacturer. Wrong or faulty spare parts can cause damage,malfunctions or
B-1200
Safety of machinery - Safety-related parts of control systems
- Part 1: General principles for design.
Safety of electrical devices / drives for gates.
Electromagnetic compatibility (EMC) - Interference emission
Electromagnetic compatibility (EMC) - Immunity
Household and similar electrical appliances - Safety – Part 2-95:
Particular requirements for drives for vertically moving garage
doors for residential use.
Household and similar electrical appliances - Safety - Part 2 103:
Particular requirements for drives for gates, doors and windows.
even a total failure of the product.
Declaration of conformity and Installation
57