Novoferm B-1200 Montageanleitung Seite 39

3. Input STOP A
The drive is stopped or the start-up is suppressed via this input.
G - Connection for slip contact (accessory) or emergency stop
4. Input STOP B
The automatic reversal of direction of the drive while closing is activated
via this input.
H - Connection 4-wire light barrier (e.g. LS5)
G // H - Connection of photoelectric sensor LS2 (please refer to the
connection points of the photoelectric sensor manual for use of
other photoelectric sensors)
5. Power supply 24 V DC, max. 100 mA (permanent)
I - Connection for e.g. external receiver (accessory)
B-1200
Installation
+ - - +
39