ENG man MITO-MINI 03
Radio Remote Control System MITO-MINI
4. BATTERY CHARGER
4.1 OPERATING INSTRUCTIONS
The battery should be charged at an ambient temperature between +0° C and +45° C, avoiding power supply failures
during the charging process.
Connect the power supply unit supplied with the battery charger by pushing the plug into the receptacle on battery
charger bottom side.
Connect the power supply unit to the power outlet. The POWER light turns on. Place the transmitter onto the battery
charger and push down until transmitter clicks into place. The charging process begins.
Placing the transmitter onto the battery charger terminates the radio connection with the receiver, if still active.
battery charging status is indicated by the Power and Status lights:
NOTE 1:
The charging process will be interrupted outside the allowed temperature range (over 45° C or below 0° C) to protect the
battery. This is indicated by the Power light turning on and the Status light going out. The charging process is resumed
as soon as temperature is back within the allowed range.
NOTE 2:
Ensure that the battery is fully charged before storing away the radio remote control for long periods of time. Leaving the
unit unused for long periods with a low battery may significantly shorten product life..
- Page 16 -