Storing Access Codes; Learn Mode - ELCA MITO Betriebsanleitung

ENG man MITO-MINI 03 Radio Remote Control System MITO-MINI

2.6 STORING ACCESS CODES

In order to associate a transmitter to receiver, the transmitter access code needs to be stored in the receiver memory. The
access code is a unique code set at the factory that prevents the receiver installed on the machinery from responding to
any unauthorised transmitters. When several transmitters are registered in a receiver's memory, the receiver will handle
transmitters on a first-come-first-served basis and the current transmitter will have exclusive access to the receiver until
transmission is terminated. Up to 20 access codes can be stored.

Learn mode:

The learn mode allows you to associate one or more new transmitters to the receiver.
- Page 8 -