Connecting The Monitor; The Monitor Work Space - Medion AKOYA P54037 Bedienungsanleitung

5.10. Connecting the monitor

 Prepare your computer for the monitor as necessary so that the correct settings are available for your monitor.
 Make sure that the monitor is not connected to the mains (mains plug is not yet inserted) and the monitor and the
computer are not switched on.
Note
Only one type of connection can be used at the same time.
5.10.1. Connecting the signal cable
 Connect the signal cable to the matching VGA or DVI connections on the computer and the monitor.
5.10.2. Connecting the audio cables
 Connect the audio cable to the matching audio jacks on the computer and on the monitor.
5.10.3. Connecting power supply
 Connect the power cord to the power connector of the screen. Connect the other end into an electrical outlet. The
mains power outlet must be close to the monitor and easy to access. (Use the same electric current as for the PC).
5.10.4. Switching on the monitor
 Use the On/Standby button at the front of the device to switch on your monitor. Then switch on your computer.

5.11. The monitor work space

Please note: The monitor should be set up in such a way as to avoid reflections, glare, and excessive contrast.
• Hand rest area: 5–10 cm
• The top screen line at eye height or a little below
• Viewing distance: 40 to 70 cm
• Leg room (vertical): at least 65 cm
• Leg room (horizontal): at least 60 cm
DE
EN
FR
IT
NL
DK
33 of 42