Windows Vista: Display Settings; Back Connections; Connecting The Monitor; Connect Signal Cable - Medion AKOYA P55005 Bedienungsanleitung

Windows Vista: Display Settings

Make the screen settings under 'Display and Sound' in
'System Control' under Windows Vista®.
The program can be started by means of the following steps:
 Right mouse click on the Windows interface (Desktop) and
left mouse click on "Adjust".
 By clicking with the left mouse button on 'Start' 
'System control'  'Adjust display and sound'.

Back Connections

Power supply (POWER IN)
1.
DVI-D 24-Pin connection (DVI)
2.
HDMI connection (HDMI)
3.
Mini 15-pin D-sub connection (VGA)
4.
3.5 mm stereo jack audio connection (AUDIO IN)
5.
Intake device for protection against theft (Kensington lock)
6.
Speakers
7.

Connecting the monitor

Please read the "Safety information" chapter (from page 3), in order to bring the TFT monitor into operation
immediately.
We recommend that you also read the other chapters, in order to receive detailed explanations and operating
instructions for your TFT display unit.
 Ensure that the TFT monitor has not yet been connected to the electricity supply (mains plug not yet
plugged in) and that neither the TFT monitor nor the computer has been switched on.
 Prepare your computer for the TFT monitor if necessary, so that the correct settings for it will be present.

1 Connect signal cable

 Plug the signal cable into the appropriate VGA, HDMI or DVI connections on the computer and the TFT
monitor.

2 Connect audio cable

 Plug the audio cable into the appropriate audio sockets on the computer and the TFT monitor.
8
or
(Ill.: Display and sound)
(Ill.: Back of the monitor)
English