Alarm; Setting The Alarm Time - ADE CK 1713 Bedienungsanleitung

the signal from the DCF77 transmitter. If the time
signal has been received with sufficient strength,
the hands set themselves to the correct time.
The radio-controlled alarm clock switches on
several times a day and synchronises the time
with the radio signal from the transmitter DCF77.
In the event the signal is not received, e.g. during
a strong storm, the device continues to run
precisely and then switches to receiving mode
again at the next scheduled time.

Alarm

Setting the alarm time

1. Use the knob to set the small hand to
the desired alarm time. Turn only in the
indicated direction of rotation!
2. Set the alarm switch to the ON position.
45