Activate Alarm; Being Awakened - ADE CK 1718 Bedienungsanleitung

Alarm
C) You have chosen
The last played back radio station will be used as the radio alarm source.
1. Use the or
2. Use the or
for coloured)
3. Press to confirm the setting.
If you have selected "1" (white):
− Set the desired brightness when awakening ("L 00" to "L 18").
If you have selected "2" (coloured):
− Set the desired colour when awakening ("C 1" to "C 8").
− Press
to confirm the setting.
− Set the desired brightness when awakening ("L 00" to "L 05").
4. Press to complete the settings.

Activate alarm

− Set the right slide switch on the back of the device to .
The alarm function is now active.
The display will show the alarm symbols and
source) or (for the radio alarm source).
If you use the
function is enabled, it will be played back briefly for approx. 3 seconds.

Being awakened

At the set time, you will wake up to the selected alarm source, and the alarm sound will
be getting louder with increasing alarm time.
In addition, the wake-up light will switch on 30 minutes before the alarm according to
your settings, with its brightness gradually increasing.
Interrupting the alarm for 24 hours
− Press one of these
lighting.
After 24 hours, the alarm will be triggered again.
Auto-stop function
If you do not press any button, the alarm and light will switch off automatically in
30 minutes (buzzer: 2 minutes). After 24 hours, the alarm will be triggered again.
34
radio:
button to set the desired alarm volume ("L 00" to "L 15").
button to set the desired wake-up light colour ("1" for white or "2"
slide switch to change the alarm source when the alarm
(for the natural sounds alarm
buttons to stop the alarm and switch off
Wake-Up Light CK 1718