Divina SUP025MYDR Gebrauchsanweisung Seite 38

ENGLISH
• press "∧" or "∨" to select the function:
ON/OFF TIME
and enable it by pressing "MENU/OK".
• Select the hour when you want the machine
to go on by pressing "∧" or "∨" and memorise
by pressing "MENU/OK".
ON/OFF TIME
ON
then press "∧" or "∨" to set the minutes and
memorise the setting by pressing "MENU/OK".
• Select the hour when you want the machine
to go off by pressing "∧" or "∨" and memorise
by pressing "MENU/OK";
ON/OFF TIME
OFF
then press "∧" or "∨" to set the minutes and
memorise the setting by pressing "MENU/OK".
Warning: if the on/off time settings
coincide, the machine will ignore
both. After the times have been set, the
clock must be activated in order for the
function to work.
Activating the automatic on/off
function
Note: activating this function makes
sense only if you have already set the
on/off times.
• Press "∧" or "∨" to select the function:
CLOCK
enable it by pressing "MENU/OK".
• The display will show:
CLOCK
OFF
In this case pressing "MENU/OK" will
deactivate the function.
7:30
9:30
• 38 •
Choose to activate the function by pressing
"∧" or "∨" and when
CLOCK
ON
appears, memorise the setting by pressing
"MENU/OK".
When you exit the programming mode, the
machine will check the set parameters. If the
current time falls within the set deactivation time,
the display will indicate:
ENERGY SAVING
Note: during the set deactivation
period, the machine can be restarted
at any time by pressing "MENU/OK". Later,
to deactivate the machine again, go into the
programming mode by pressing "MENU/
OK" and exit immediately by pressing "ESC".
RINSING CYCLE
With this function, all the parts involved in the coffee
dispensing process undergo a washing cycle with water.
During the wash cycle it is
recommended that a person be on
hand to supervise the operation.
• To start the wash cycle, press "∧" or "∨" to
select the function:
RINSING CYCLE
to enable the function press "MENU/OK". Press
"MENU/OK" again to start the wash cycle.
• When the wash cycle is completed, the
following message will appear.
FILL WATERTANK
At this point fill the water tank. The machine
will automatically switch to the normal
operating mode and the following message
will appear on the display:
SELECT PRODUCT
READY FOR USE