Water Hardness - Divina SUP025MYDR Gebrauchsanweisung

• To deactivate the "ENERGY SAVING"
function, press "MENU/OK".
RINSING
Immediately after heating up, the appliance
automatically eliminates the water left standing
in the internal circuit to ensure that only fresh
water will be used to make coffee.
The function is activated in the factory.
• To deactivate it, go to the programming mode
and press "∧" or "∨" to select the function:
RINSING
and enable it by pressing "MENU/OK". The
following message will appear:
RINSING
ON
Now press "∧" or "∨"to select
RINSING
ON
and store the selection by pressing "MENU/OK".
We recommend selecting:
RINSING
ON
LANGUAGE
This function allows you to change the
language of the display. You can choose
among Italian, German, Portuguese, Spanish,
English, French and Dutch. The appliance is
normally set on the language of the country it
is to be sold in.
• After accessing the programming mode, press
"∧" or "∨" to select the function:
LANGUAGE
and then enable it by pressing "MENU/OK".
RINSING
OFF
• 35 •
The display will show:
LANGUAGE
ENGLISH
Press "∧" or "∨" to select the desired language
and then press "MENU/OK" to memorise it.

WATER HARDNESS

The hardness of tap water may vary from
region to region. For this reason, the
appliance may be adjusted according to the
degree of hardness of the water in the place
it will be used in; hardness is measured on a
scale of 1 to 4.
The appliance is already programmed for
an average value (hardness 3). The
appliance setting should be adjusted according
to the actual hardness of the water, which can
be measured using the test strip provided.
Briefly dip (1 second) the test strip
provided in water and shake it gently. After
one minute you can read the test results
on the strip.
• After accessing the programming mode press
"∧" or "∨" to select the function:
WATER HARDNESS
and enable it by pressing "MENU/OK".
• The display will show:
WATER HARDNESS
HARDN 3
• Check the test strip previously immersed in
water to see how many squares have changed
colour.
• Press "∧" or "∨" to select the correct water
hardness (e.g. 2 squares = Hardness 2) and
memorise it by pressing "MENU/OK".
Caution: descale the appliance when
the max water hardness level is reached.
The display will show the message:
DESCALING
READY FOR USE
ENGLISH