Divina SUP025MYDR Gebrauchsanweisung Seite 37

• After accessing the programming mode, press
"∧" or "∨" to select the function:
FACTORY SETTINGS
then enable it by pressing "MENU/OK". The
following indication will appear:
FACTORY SETTINGS
NO
• Choose whether you want to restore the factory
settings by pressing "∧" or "∨" and press
"MENU/OK" to confirm your selection.
Caution: when you restore all the
factory settings, you will lose any
custom settings you have made on the
machine.
CLOCK
This function may be activated and deactivated
by the user. It is used to:
- display the current time when the machine is
in the "ENERGY SAVING" or "FUNCTION
SELECTION" mode;
- program the machine to switch on and off at
a specific time.
In order for the programming function to work
properly, you must set the clock to the current
time.
• Press "∧" or "∨" to select the function:
CLOCK
enable it by pressing "MENU/OK".
• Press "∧" or "∨" to select the function:
CLOCK TIME
enable it by pressing "MENU/OK".
• Press "∧" or "∨" to set the current hour and
memorise it by pressing "MENU/OK";
CLOCK TIME
1:18
• 37 •
Then press "∧" or "∨" to set the minutes and
memorise the setting by pressing "MENU/
OK". The clock is set and the machine will go
back to the previous menu.
Note: keeping the buttons pressed
down will allow you to go through
the numbers quickly.
Note: the clock setting is also
maintained when the machine is off
Displaying the time
• press "∧" or "∨" to select the function
SHOW CLOCK TIME
and enable it by pressing "MENU/OK".
• press "∧" or "∨" to activate or deactivate the
function
SHOW CLOCK TIME
ON
and memorise the setting by pressing "MENU/OK".
Note: the time may be displayed only
at certain times; this function must
be deactivated by the user
• If you want to deactivate the function press
"∧" or "∨" to choose:
SHOW CLOCK TIME
OFF
and memorise by pressing "MENU/OK"
Programming the machine to
switch on and off .
The machine can be switched on and off
automatically without the user's intervention. You
can program only one time for the machine to
go on and one time for it to go off.
Note: this function is enabled only
i f t h e o n / o f f s w i t c h ( 7 ) i s
positioned on "I" (on).
ENGLISH