Vortice HRI-E One Betriebsanleitung Seite 24

ENGLISH
- SUN: allocation of profile to Sunday: possible values
are P1 and P2
HA Option
24 24
FILT
1 2 3
esc
/ °C
By-Pass
- ST: start time, profile P1
- EN: end time, profile P1
- ST1: start time, profile P2 interval 1
- EN1: end time, profile P2 interval 1
- ST2: start time, profile P2 interval 2
- EN2: end time, profile P2 interval 2
- MON: allocation of profile to Monday: possible values
are P1 and P2
- TUE: allocation of profile to Tuesday: possible values
are P1 and P2
- UED: allocation of profile to Wednesday: possible
values are P1 and P2
- THR: allocation of profile to Thursday: possible values
are P1 and P2
- FRY: allocation of profile to Friday: possible values are
P1 and P2
- SAT: allocation of profile to Saturday: possible values
are P1 and P2
- SUN: allocation of profile to Sunday: possible values
are P1 and P2
24
P1
P2 HA
4 5 6 7
set
Prg
View alarm menu (fig.25)
Before proceeding with the steps indicated below, press
the ESC button to exit and return to the initial menu.
25 25
FILT
1 2 3
esc
/ °C
By-Pass
The indication of any alarm conditions that may have
been tripped can be displayed as follows:
--press and hold the SET button
--press and release the UP or DOWN button to view
ALRM menu
--press and release the SET button to view the active
error code The various alarm situations that can affect
the system are displayed on the user panel as follows:
ti: indoor temperature sensor faulty; contact Technical
Support for assistance;
tout: outdoor temperature sensor faulty; contact
Technical Support for assistance;
te: exhaust air temperature sensor faulty; contact
Technical Support for assistance;
preh: preheater faulty or missing (if applicable); contact
Technical Support for assistance;
Hito: outdoor temperature higher than 45 °C; contact
Technical Support for assistance;
Hiti: indoor temperature higher than 45 °C; contact
Technical Support for assistance;
Filt: clogged filters need replacing (2 months). Once
new filters have been fitted, the error can be reset by the
user: this is done simply by pressing and holding the UP
and DOWN buttons together.
N.B. Manually resettable errors can be removed by
pressing and holding the UP and DOWN buttons
together.
P1 P2
HA
4 5 6 7
set
Prg