Kenwood KDC-4554U Bedienungsanleitung Seite 18

Symptom
"COPY PRO" appears.
"READ ERROR" appears.
"NO DEVICE" appears.
"NO MUSIC" appears.
"NA DEVICE" appears.
"USB ERROR" appears.
"iPod ERROR" appears.
Noise is generated.
Tracks cannot play back as you have
intended them to play.
"READING" keeps flashing.
Elapsed playing time is not correct.
The number of songs contained in
"SONGS" category of this unit is different
from that contained in "SONGS" category
of iPod.
Correct characters are not displayed (e.g.
album name).
Muting upon the reception of a phone call
To use this feature, connect the MUTE lead to your telephone using a commercial telephone
accessory. (page 20, 21)
When a call comes in, "CALL" appears.
The audio system pauses.
To continue listen to the audio system during a call, press
audio system resumes.
When a call ends, "CALL" disappear.
The audio system resumes.
18
A copy-protected file is played.
Copy the files and folders for the USB device again. If the error message is still
displayed, initialize the USB device or use other USB devices.
No USB device is connected. Connect an USB device, and change the source to
USB again.
The connected USB device contains no playable audio file.
Connect a supported USB device, and check the connections.
Remove the USB device, turn the unit off, then turn it on again. If the unit still
showing the same display, try to connect another USB device.
Reconnect the iPod. / Reset the iPod.
Skip to another track or change the disc.
Playback order is determined when files are recorded.
Longer readout time is required. Do not use too many hierarchies and folders.
This is caused by how the tracks are recorded.
Podcast files are not counted in this unit as this unit does not support the playback
of podcast files.
This unit can only display letters (upper case), numbers, and a limited number of
symbols. Cyrillic alphabets (upper case) can also be displayed if [RUSSIAN SET] is
set to [ON]. (page 7, 8)
Remedy/Cause
SRC. "CALL" disappear and the