Baninni TWIRL 360 BNCS021 Gebrauchsanleitung Seite 19

ADJUST THE
LENGTH OF
SUPPORT LEG
Press the button and adjust the length
of support leg to suitable for different
height of car seat. Make sure the
bottom of the support leg touch the
ground completely and the support
leg status window shows green.
IMPORTANT:
Push the support leg
counterclockwise before adjusting the
length of support leg.when you hear a
"click" means you have got the right
angle of support leg.Then you can
adjust the length of support leg.
ADJUST THE CHILD
SEAT TO DIFFERENT
ROTATING POSITIONS
This child seat can be free to rotate 360
degrees. Clench the rotate
adjuster until it press into the body of
seat ,then hold on the base in another Rearward-facing Forward-facing
(blue) (red)
hand .Now you can rotate the child seat.Be
picture 2
sure to hear a "click" when turning to the
forward-facing or rearward-facing.