HQ Power VDP250MHS13 Bedienungsanleitung Seite 4

f) Replacing the fuse
• If the lamp burns out, the fuse of the device might fuse, too.
• Only replace the fuse by a fuse of the same type and rating.
• Before replacing the fuse, unplug mains lead.
1) Unscrew the fuse holder on the rear panel of the base with a fitting screwdriver from the housing.
2) Remove the old fuse and install the new fuse in the fuse holder.
3) Replace the fuse holder in the housing and fix it.
5. Use
a. The moving head is controlled by 16 DMX channels:
CHANNEL 1 : pan movement (max. 530°)
CHANNEL 2 : tilt movement (max. 280°)
CHANNEL 3 : pan fine
CHANNEL 4 : tilt fine
CHANNEL 5 : speed of pan/tilt movement
CHANNEL 6 : lamp on/off & reset
CHANNEL 7 : colours
CHANNEL 8 : prism
CHANNEL 9 : rotating gobos
CHANNEL 10 : rotating gob index, rotating gobo rotation
CHANNEL 11 : focus
CHANNEL 12 : shutter / strobe
CHANNEL 13 : dimmer intensity
b. Detailed DMX values per channel:
CHANNEL 1
CHANNEL 2
CHANNEL 3
CHANNEL 4
CHANNEL 5 Speed of PAN / TILT movement
CHANNEL 6 LAMP ON / OFF AND RESET
CHANNEL 7
CHANNEL 8
CHANNEL 9 ROTATING GOBOS
VDP250MHS13
Description From
PAN
TILT
PAN FINE
TILT FINE
COLOUR 1
PRISM
To Function
0 255 530° Rotation
0 255 280° Rotation
0 255 Fine control of PAN movement
0 255 Fine control of TILT movement
0 255 Slow / Fast
0 127 No function
128 139 Lamp on after 3 sec, reset
140 229 No function
230 239 Lamp off after 3 sec.
240 255 No function
0 15 White
16 31 Red
32 47 Yellow
48 63 Magenta
64 79 Green
80 95 Orange
96 111 Blue
112 127 Pink
128 255 Forwards rainbow effect from slow to fast
0 4 No rotation
4 127 Forwards rotation fast / slow
128 132 No rotation
133 255 Backwards rotation slow / fast
0 31 Open
32 63 Rotating gobo 1
64 95 Rotating gobo 2
96 127 Rotating gobo 3
128 159 Rotating gobo 4
160 223 Rotating gobo 5
224 255 Backwards rotation slow / fast
4 HQ POWER