Quick Reference Guide - Lextronix E1 Bedienungsanleitung

E1_manual_lextronix_APR06.qrk 5/4/06

QUICK REFERENCE GUIDE

QUICK REFERENCE GUIDE
3
The symbol indicates that the key is to be
pressed within three seconds.
Select normal frequency display (VFO) (page 86 item 20)
Select normal frequency display (VFO) (page 86 item 21,
22, 23)
Adjust Frequency (page 88)
Select Mode (page 89-92)
Select AM SYNC (page 90)
Select Bandwidth (page 86, item 13)
Select AGC (page 86, item 12)
DX (preamplifier) On or Off (page 82 item 16)
Set Time (page 119)
Display GMT or Local Time (page 115)
116
4:52 PM Page 118
• Press 'VFO'
• Press 'FM', SW, MW or LW softkeys to select FM
Broadcast, Shortwave,AM Broadcast or Long Wave
bands. When in Shortwave mode, press 'SW' two or
three digit entry from 'Direct-Key-Input' keypad for
Shortwave Meter band designation.
• Select Band. Turn 'TUNING' knob, Press '< SELECT >'
keys, use 'Direct-Key-Entry' keypad.
• Press 'AM' for displayed 'AM'
• Press 'AM' again to toggle to 'AM SYNCH'
• Press 'SSB' to scroll between 'USB', 'LSB' and DSB
when 'AM SYNCH' is displayed.
• Press 'FM' as required to display 'FM'.
• Press 'SSB' to select SSB mode. (AM SYNC must be
off. To turn off, press AM).
• With unit in 'AM' mode, press 'AM' again. 'AM SYNC'
will flash and then lock on.
• Press 'BW' for displayed '7.0', '4.0' or '2.3' kHz (not
active in FM).
• Press 'AGC' for displayed 'SLOW', 'FAST', or AUTO (not
active in FM).
• Press 'DX' for displayed 'DX' or blank.
• Press 'MENU' to display MAIN MENU. Then press '3' to
display SET CLOCKS display.
• Press '1', set Local time using keypad, and press
STORE to start clock.
• Press '2', set GMT time using keypad and press
'STORE' to start clock.
• Press '9' to exit SET CLOCKS display
• Press 'TIME' key 3 times.
• Press GMT or LOCAL softkey to select.
• Press 'TIME' key again to exit menu.
• Time is always displayed in upper right corner when
on, and in center of display when off.
Quick Reference Guide continued > > >
QUICK REFERENCE GUIDE continued
Program ON/OFF timers (starting 120)
Activate (Enabling) Timer (page 123)
Lock (or Unlock) Controls (page 123)
Display light On/Off (page 124)
Disable Beep (page 92)
MEMORY FUNCTIONS
• Store MEMORY Channel (page 92)
• Store COUNTRY Channel (page 94)
• Recall MEMORY Channel (page 92)
• Recall COUNTRY Channel (page 94)
Select MEMORY or COUNTRY Channel
for T.SCAN (page 118)
• Delete a MEMORY Channel (page 95)
• Delete a COUNTRY Channel (page 97)
E1 MANUAL
• Press MENU to activate MAIN MENU
• Press '5' to activate TIMERS menu.
• Press '1' and set TIMER 1 ON time using Keypad.
• Press 'STORE' to save.
• Press '2' and set TIMER 1 OFF time using keypad.
• Press 'STORE' to save.
• Press '3' and set TIMER 1 Memory Channel using key-
pad and press 'STORE' to save.
• Repeat for TIMER 2 using menu entries 4, 5, and 6.
• Press '9' to exit menu.
• Press 'TIME' to activate TIMER 1 menu.
• Press 'ENABLE' to activate.
• Press 'TIME' again to activate TIMER 2 menu.
• Press 'ENABLE' to activate.
• Press 'TIME' again twice to return to normal operation.
• TIMER 1 and/or 2 will be displayed below the clock to
indicate activation.
• Press and hold 'CLR/LOCK' until "LOCK" is displayed
(extinguishes).
• Pushbuttons (except POWER) and 'TUNING' knob are
inactive (active).
• Press 'LIGHT' to scroll display lighting through bright,
medium, dim and off.
• Press 'MENU' to enable MAIN MENU.
• Press '2' to enable the AUDIO SETTINGS menu.
• Press '2' to toggle Beep on and off.
• Press '9' to exit menu.
• Select frequency, bandwidth, AGC and mode.
• Press 'STORE'. This will activate MEMORY or COUNTRY
memory mode.
• Press MEMORY or COUNTRY to select your preference.
• Select an empty location using 'TUNING' or '< SELECT >'.
• Press 'STORE' to save.
• If in MEMORY mode, use 'TUNING' and '< SELECT >' to
assign name, and press STORE again.
• Press 'MEMORY' or 'COUNTRY'.
• Use 'TUNING' and/or '< SELECT >' to select desired
memory channel.
• Recall a MEMORY or COUNTRY channel as above.
• Press 'TAG' to mark the channel for T.SCAN.
• Set SQUELCH to desired level.
• Press 'T.SCAN' to activate scan.
• 'Select a MEMORY or COUNTRY channel to delete as
described above.
• Press and hold 'DELETE' for 3 seconds. A high pitched
beep will be heard and listed channel will be deleted.
Quick Reference Guide continued > > >
117